Microphone Delay Calculator

Turn a performer’s marching-band drill coordinates into a starting mixer input delay. Enter a single position or calculate a whole drill sheet.

Enter a position

Side to side
Front to back

Field position

—Estimated input delay
—From front sideline

Calculate a drill sheet

Use the columns Set, Side, Horizontal, Vertical. For example, Set 5, Side 1, 4 steps inside 45 yd, 8 steps behind front hash.

Field and audio assumptions

Side 1 is on the audience’s left. Inside means toward the 50; on the 50, use Inside for zero steps or select the desired side and Outside for an offset. Enter 0 steps for a position directly on a line.

The field is 100 yd by 160 ft with no end zones. High school hashes are 53 ft 4 in from the sidelines and college hashes are 60 ft in. Standard 8-to-5 steps are 22.5 inches. The adjusted setting fits 28 high school steps or 20 college steps between the hashes, with standard steps elsewhere.

Delay is the perpendicular travel time to the front sideline at 343 m/s. Use it as a starting point for a front-sideline PA and verify against your actual speaker position and system latency.

Inspired by the Synced Up Audio microphone delay calculator.